|
|
|
|
Record 1-100 of 336
|
first |
previous |
next |
last
|
|
Lot#
|
Qty
|
Category
|
|
n/a
|
1
|
Yarn Manufacturing
|
|
Microcreper / Micrex / 124" wide
Micrex Microcreper 124" wide for treating 120" maximum fabric width. This precisely controlled mechanical process can treat many types of textile fabrics. The compacting process will provide texture, soft hand, shrinkage control, stretch and bulk. The machine can be adjusted to impart a smooth finish or a variety of textures to the fabric. The complete width of the fabric can be treated or just selected areas. The microcreping process typically improves fabric softness giving it a better hand and drape. Residual shrinkage can be reduced or eliminated. Fabrics can be made to feel thicker and fluffier.
Operates at speeds up to 100ypm/mpm.
50/3 HP DC Dual Drive System.
80 KW Fluid Heat Transfer System for 440v, 60hz, 3ph electrical supply.
124" Micrex flat roll, flat blade configuration with flat blade holder for processing a 120" maximum fabric width.
124" Micrex comb roll (grooved roller) configuration for treating a 120" maximum fabric width.
|
|
n/a
|
1
|
Embroidery & Sewing
|
|
|
Sewing machine / Fischbein
Fischbein sewing machine Model EH, S/N 49360. Portable stand 20 x 24
|
|
n/a
|
2
|
Dyeing Printing & Finishing
|
|
|
Tenter / Banjo Rails / Winsor & Jerauld
(2) Sets of Used 100' long Winsor and Jerauld fabricated 7" to 14" banjo rails.
Rails are fabricated formed steel weldments with removable wear strips.
|
|
n/a
|
1
|
Dyeing Printing & Finishing
|
|
Shear / Comet / 86 wide
Comet "Orion" Shear 86" wide, model 2000, year 1995, #C1146, Corino Guider with pivot bar.
|
|
n/a
|
240
|
Dyeing Printing & Finishing
|
|
Chain / Kenyon / DRK 88 R
240 feet Kenyon tenter chain, DRK 88 R, new (total of 1103 links)
|
|
n/a
|
261
|
Dyeing Printing & Finishing
|
|
|
Pin Plates / Kenyon
(261) Kenyon pin plates , new
2 rows of pins with 9 pins per row
|
|
n/a
|
1
|
Dyeing Printing & Finishing
|
|
Tank / Fiberglass - 6,000 gallon
Fiberglass Tank, 6000 Gallon 8 diameter x 20 long, has cradle and legs, then it can be mounted in the air
|
|
n/a
|
3
|
Yarn Manufacturing
|
|
|
Opening & Cleaning / Trutzschler / FO-1200 with Condensor, yr. 1997
Trutzschler FO-1200 with Condensor, year 1997
Each Line Includes: Trutzschler Opener and Condensor & BS Reserve
Line # 2:
1997 Trutzschler FO 088, Type FO-1200, Type No. 088-07-05, Opener, Com No. R09008/C11790-02
1997 Trutzschler LVSA Condensor
1997 BS-1200 Reserve, 1730 mm high
Line # 3:
1997 Trutzschler FO 088, Type FO-1200, Type No. 088-07-05, Opener, Com No. R09008/C11783-01
1997 Trutzschler LVSA
1997 BS-1200 Reserve, 1730 mm high, Type No. 987-07-02, Com No. R09007/C11782-02
Line # 4:
1997 Trutzschler FO 088, Type FO-1200, Type No. 088-07-05, Opener, Com No. R09008/C11783-02
1997 Trutzschler LVSA Condensor
1997 BS-1200 Reserve, 1730 mm high, Type No. 987-07-02, Com No. R09007/C11782-01
|
|
n/a
|
1
|
Dyeing Printing & Finishing
|
|
|
Horizontal Washer / Morrison, 7-pass
Morrison Horizontal Washer, 7-pass, with 136" face
rubber/stainless nip set, S/N T-357
Year 2000
|
|
n/a
|
1
|
Dyeing Printing & Finishing
|
|
Unwinder, Slitter, Rewinder / Cameron-Midland
(1) Cameron-Midland Unwinder, Slitter, Rewinder, 4 meters wide
With single turret unwind stand order #5165, 3/1985,
Belt driven positive unwind, shear cut slitting section (4 knives) and double arm rewind, max. dia. 50 wind-up, double core puller and double upenders
Speed: 2000' per minute
a/c inverter drive
rebuilt and automated in 2007
|
|
n/a
|
1
|
Lab Equipment
|
|
Mixer / Gifford Wood / Lab Eppenback
Gifford Wood Lab Eppenback type mixer (homogenizer) on stand, 115 V, 1ph
|
|
n/a
|
1
|
Dyeing Printing & Finishing
|
|
|
Transfer Printer / LeMaire / 2000 mm working width
LeMaire Transfer Printer, Model Rollingstatic SMV.178, 2000 mm working width, roll to roll rewinder, with paper transfer print, year 1992
|
|
n/a
|
1
|
Dyeing Printing & Finishing
|
|
Inspection machine / In Line Inspection and A-Frame Wind-Up
In Line Inspection and A-Frame Wind-Up consisting of:
1) One 3-Roll 85-1/2 wide Compensator with 2-SS Rolls 86 wide x 5 dia. and 1-SS Roll 85-1/2 wide x 5 dia.
2) Hunter Lab Color Management System SpectraProbe XE, Model 80223158, S/N 039723801A, 104 wide
The SpectraProbe XE online color measurement system can be used to measure the color of the fabric as it exits in a textile finishing range (typically after the drying cans or tenter oven). The sensor traverses over the surface of the fabric so side-center-side shading differences can be assessed and immediate adjustments made to the range based upon these values. The colormetric results are displayed on screen and users are alarmed when the tolerances for these are exceeded
The system has provision for analog/digital outputs, which serve to report color data to a plant DCS or PLC control system, allowing color measurement data to be used in the control of range process variables
3) Scray consisting of:
A - Menzel J-Scray, tubular stainless steel 84 wide with 1-SS Roll 84 wide x 5 diameter, 1-Rubber Roll 84 wide x 7 diameter, Type 84SC, S/N 01179, year 1996
B - Light box 93 wide x 46 high. Over the light box there is 1-Steel Roll 84 wide x 5 diameter, 1- Set of tension Rods 84 wide and 1-SS Roll 82 wide x 4 diameter
C - 1-Set of 18 wide Guiders Specialty guides, Model 45, Right side mfgr. # P938, Left side mfgr. # X923
4) A-Frame Wind-Up consisting of:
A - Walk Board with 2-Steel Rolls 84 wide x 5-1/2 diameter
B - Inspection station with 5-SS Rolls 84 wide x 5 diameter
C - Menzel A-Frame Wind-Up 88 wide, S/N 03083 year 1981. With 2-Steel Rolls 88 wide x 8 diameter, 1-SS Roll 88 wide x 4 diameter, 1-SS Roll 88 wide x 6 diameter, 1-Steel Roll 92 x 5 diameter. Drive motor: 10HP, 230/460 Volt, 23.8/11.9 Amp, 50/60 Hz, 135-1755 rpm, S/N O1UB263526G1ZY. With hydraulic pump for raising and lowering the arm
|
|
n/a
|
1
|
Lab Equipment
|
|
Pilling Tester / Atlas / 2 position
Atlas Random Tumble Pilling Tester, 2 position, Model PT-2, S/N PT-798, 115 V, 60 hz, 1 ph, 4.5 amps
|
|
n/a
|
1
|
Yarn Manufacturing
|
|
|
Small Filter House / Herman Reeves
Herman Reeves Sheet Metal, Inc. small filter house, pre-separator
|
|
n/a
|
46
|
Yarn Manufacturing
|
|
|
Valves
Valves - 6", 9", 11", 12"
|
|
n/a
|
8
|
Yarn Manufacturing
|
|
|
Fans / 4 - 5 hp
Small fans, 4-5 hp
|
|
n/a
|
5
|
Yarn Manufacturing
|
|
|
Electrical Control Panel
Electrical Control Panel
3 - Trutzschler
2 - Rieter
|
|
n/a
|
3
|
Yarn Manufacturing
|
|
|
Hump Magnet / 27"
27" Hump Magnet
|
|
n/a
|
1
|
Yarn Manufacturing
|
|
|
Opening & Cleaning / Trutzschler / Control Panel
(1)Trutzschler Control Panel for RST
600 volts
|
|
n/a
|
1
|
Yarn Manufacturing
|
|
|
Hump Magnet / 18"
18" Hump Magnet, 12" opening
|
|
n/a
|
1
|
Yarn Manufacturing
|
|
|
Opening & Cleaning / Trutzschler / T-Valve with Fan
(1)Trutzschler T-Valve with fan
|
|
n/a
|
1
|
Yarn Manufacturing
|
|
|
Strapping Shredder / Osbell Co.
Osbell Co. strapping shredder, No. 20, modern, 3 hp motor
|
|
n/a
|
1
|
Lab Equipment
|
|
Pilling Tester / Atlas / 4 position
Atlas Random Tumble Pilling Tester, 4 position, Model PT-4, S/N PT-538, 115 V, 60 hz, 1 ph, 4.5 amps
|
|
n/a
|
1
|
Dyeing Printing & Finishing
|
|
Dye Machine / Thies / Single Tube Jet Dye / 100 kg
Thies single tube jet dye machine, 100 kg capacity, S/N 34471, year 1998
Maximum working pressure 50.8 psi @ 284 deg., National Board # 4101, 480 volt, 3 ph, 60 hz
Heat exchanger National Board # 4102, S/N 34472, 50.8 psi @ 284 deg., year 1998
|
|
n/a
|
1
|
Dyeing Printing & Finishing
|
|
|
Complete Direct Digital Print Facility (For Disperse and acid dyes)
Complete Direct Digital Print Facility (For Disperse and acid dyes), consisting of:
REGGIANI MACHINE: Tipo Dream
Model- 220/6/1
Serial Number 802/09
Year 2006
480V 60Hz 3PH 95.0kva
MS Steamer: Manufacturer Year 2006
Serial Number 1381/06
Machine Type MS Vapo Cont 15 SC
480V 60Hz 3PH 15.5kva
MS Washer: Manufacturer Year 2006
Serial Number 1381/06
Machine Type MS Washer
480V 60Hz 3PH 3.5kva
MS Tenter: Manufacturer Year 2006
Serial Number 1381/06
Machine Type MS Mini Stenter
480V 60Hz 3PH 7.0kva
Vacuum Pump: Size SC-4 25HP
Test No: 93U1278
480V 60Hz 3PH 34Amp
1750 RPM
Miura Boiler: Model LX-50-05
Serial Number 445462032
Year and Month 2007/01
480V 60Hz 3PH Total Current Of Motors 8Amps
|
|
n/a
|
1
|
Dyeing Printing & Finishing
|
|
Calender for transfer printing / Monti Antonio
Monti Antonio calender for transfer printing
cylinder width: 2.2 mm
cylinder diameter: 1 mm
Includes: flat entry; long preparation table, total length 3000 mm; infrared pre-heater in entry; operators platform; 2.0 mm transport belt as working table (total length of the table remains 3000 mm); longer lower transport belt for cooling garments
|
|
n/a
|
2
|
Yarn Manufacturing
|
|
|
Draw Frame / Rieter / RSB-951, year 1996
Rieter RSB-951 Draw Frames (Tag 1084 & 1085) 30 x 48 Sliva monitor, Drag Creel, Central Pneumafilmake. S/N NO4010/2, Year 1996
|
|
n/a
|
|
Knitting & Hosiery
|
|
|
Knitting Parts / Various / Needles
Samsung, Groz Beckert and Exeltor Needles:
- for Pai Lung 14 and 18 cut
- for Vanguard 12, 14, 18, 22 and 28 cut
- for Mayer Rib/Dial 14 cut
|
|
n/a
|
|
Knitting & Hosiery
|
|
|
Knitting Parts / Pai Lung cams
Pai Lung Cams, various diameters
12A,
13, 13A,
14,
15, 15A,
16, 16A,
17,
18A, 18B, R18B,
19, 19A,
20, 20A, 20B,
23, 23A,
24A,
30, 30A, 30B, R30, R30B,
104,
217, 217B
R209,
R214, R214B,
R218,
R220, R220B,
R221, R221B,
R223, R223B,
R226, R226B,
22 Bags of Screws (over 50 in each bag)
|
|
n/a
|
1
|
Dyeing Printing & Finishing
|
|
Napper / Comet / 32-roll, double action, 78 wide
Comet Napper, 78" Wide, Double Action, 32 Rolls, Type: CYGNUS-X1, Exit Folder, Serial Number 31D6356
|
|
n/a
|
51
|
Weaving, Embroidery & Sewing
|
|
|
Loom / Picanol / Omni-2-P Air Jet, 190cm, year 1997/98
(51) Used Picanol Omni-2-P Air Jet Looms, 190cm wide, year 1997/98, running 700-830 picks p/min., 2 color, pick/pick automatic, bobbin stands, (2) IRO / Picanol weft feeders, Model 2231-B, Staubli positive cam motion, Model 1620B, 8 harness capacity cam, with 3 harness frames and heddles, leno selvedge, (1) selvedge cutter on right hand side, 6 bank electric warp stop motion with drop wires, electronic let-off, Bond inspection board and 2-roll wind-up, profile reed, touch screen control for automatic style change and for information data, takes an all steel adjustable warp beam, beam diameter 1000mm, 1 beam per loom, motor is 4.5kw, 480 volt, 3 phase, 60 cycle
Note: (4) looms set up that were running 12 oz. denim at 700 rpm
|
|
n/a
|
4
|
Yarn Manufacturing
|
|
Draw Frame / Rieter / RSB D30
Rieter Draw Frames, Model RSB D30, autolever, automatic can delivery, power creel, Uster Sliva monitor, Year 2000 & 2001
24 x 48
|
|
n/a
|
10
|
Dyeing Printing & Finishing
|
|
Dye Machine / G.A. Braun / 600 lb. cap.
(10) G.A. Braun Dye Machines, 600 lbs. max. capacity
480 volt, 3 ph, 60 cycle, with steam injection, 2 pocket
cylinder diam x depth: 60" x 66", cylinder vol.: 107.9 cubic ft., cylinder door area opening for loading: 600 sq. in., height of loading door above floor: 37"
extract motor-h.p. 25, extract speed-r.p.m. 554, wash motor-h.p. 10
automatice drain valve: 8", automatic inlet valve: 2", steam connection 1 1/2"
overall dimensions: 176"W x 102"D x 112"H
approx. shipping wt. skidded: 18,800 lbs
(5) Model 600NTDPV, yr 1990 - 1992
(1) Model 600NTDPV-SB, yr 1995
(2) Model 600NTDPV-3-DC, yr 1999
(1) Model 600NTDPV-2-DC, yr 1994
(1) Model 600NTDPV-2SB, yr 1995
|
|
n/a
|
2
|
Lab Equipment
|
|
Crockmeter / AATCC / Model CM1
AATCC Crockmeter, Model CM1
|
|
n/a
|
1
|
Dyeing Printing & Finishing
|
|
Resin Dispensor / applicator with feed system
Resin Dispensor with Auger feed system
|
|
n/a
|
1
|
Lab Equipment
|
|
Yarn Reel / Brown & Sharpe / 4 guides
Brown & Sharpe Yarn Reel, 4 yarn guides, 18
|
|
n/a
|
1
|
Yarn Manufacturing
|
|
Waste Picker / Wise / 43 wide, blower & collection system
Wise Waste Picker, 43 wide, with 25 HP blower and motor, with 17-bag dust collection system
|
|
n/a
|
1
|
Lab Equipment
|
|
Lab Reel / Alfred Suter / 7 guides
Alfred Suter Lab Reel, manual, 7 yard guides 0-120, 18 dia., with timing bell
|
|
n/a
|
1
|
Dyeing Printing & Finishing
|
|
|
Horizontal Washer / Morrison, 7-pass
Morrison Horizontal Washer, 7-pass, with 136" face
rubber/stainless nip set, S/N T-826
Year 1997
|
|
n/a
|
6
|
Yarn Manufacturing
|
|
|
Lint Trap / Modufil, Inc. / Model LT5000
Modufil, Inc. lint traps, Model LT5000, 5 hp
|
|
538
|
1
|
Dyeing Printing & Finishing
|
|
Scouring machine / Zonco / Year 1998
Zonco Machine to scour soften and dry woven & knitted fabrics in rope form, 2-section, Model EOLO, S/N 95.97.16, year 1998, with gas fired burner at exit for burning off all the pilling waste after scouring and washing, with computer controls, driven entrance and exit. 400V A/C / 60 / 3, absorbed power 61 KW, current intensity 140A, exit power 45 Hp. Heating elements power 400 KW, min. pressure air 500 KPA. Max. pressure air 800 KPA. FAB/Mfg. Zonco Federico, type: Secheclee, 120V/5 Amp 1,200,000 BTU per hour.
|
|
2416
|
1
|
Dyeing Printing & Finishing
|
|
Batcher / Krantz / 140" wide, Beam Winder/Unwinder
Krantz Beam Winder/Unwinder, center wind, Model DBGW, S/N 8283, 140" wide, maybe 148" max., hydraulic pump 20 HP, 230/460 volts 3/60, control panel.
Motor: Model AP AF4P20TC51L, Prod# LM1524988, 20HP, 1750/1450 rpm. 230/460/208 Volt, 54/27 Amp, 60/50 Hz, 3 ph
|
|
2421
|
1
|
Dyeing Printing & Finishing
|
|
Rail Guide / Erhardt & Leimer / Set, No tag
Set of Erhardt & Leimer Rail Guides, with E&L sensors with Tandematic plate guides, controls, electric motors for power opening. Right & Left side. No Tag
|
|
2422
|
1
|
Dyeing Printing & Finishing
|
|
Pad / Menzel / 2-roll, 138 wide, yr. 2002
Menzel 2-roll Pad, Rubber/Rubber 138" wide driven scroll rolls, type 138 PA, S/N 05133, Year 2002, 20 HP Inverter AC Drive, 230/460 3/60.
Rolls: (2) Rubber Rolls 138 x 12-1/2 dia, (3) Scroll Rolls 138 x 4 dia, (7) SS Roll 138 x 4 dia, (1) Rubber Roll 138 x 7 dia, low liquor ratio, single dip pan
Motor: Model KS256BCT205B, 230/460 Volt, 45.5/22.7 Amp, 1765 rpm, 20 HP, S/N LNG12B461004
Scroll motor Type DFT80N4, 230/460 Volt, 60 Hz, 3.70/1.83 Amp, 1 HP, 1700 rpm
|
|
2423
|
1
|
Dyeing Printing & Finishing
|
|
Pad / KTM / 2-roll, 138 wide, yr. 1998
KTM 2-Roll Pad, Rubber/Rubber, 138" wide driven scroll rolls, S/N F970078-01-02, Year 1998, 20 HP Inverter AC Drive 230/460 volt, 3/60
Rolls: (2) Rubber Rolls 138 x 12-1/2 dia, (3) Scroll Driven Rolls 138 x 4 dia, (7) SS Roll 138 x 4 dia, (1) Rubber Roll 138 x 7 dia, low liquor ratio, single dip pan
Motor Model 7VL256THTNA803BBL, 230/460 Volt, 20HP, 31.0/15.5 Amp, 3 ph, 1780 rpm.
Scroll motor Type DFT80N4, 230/460 Volt, 60 Hz, 3.70/1.83 Amp, 1 HP, 1700 rpm, 3 ph
|
|
2424
|
1
|
Dyeing Printing & Finishing
|
|
Rail Guide / Erhardt & Leimer / Set, No tag
Set of Erhardt & Leimer Rail Guides, Tandematic plate guides, controls, electric motors for power opening. Right Side & Left side. No Tag
*Dont have the eye
|
|
2425
|
1
|
Dyeing Printing & Finishing
|
|
Pad / Menzel / 2-roll, 138 wide, yr. 2004
Menzel 2-roll Pad, Rubber/Rubber 138" wide driven scroll rolls, type 138 PA, S/N 05134, Year 2004, 20 HP Inverter AC Drive, 230/460 3/60
Rolls: (2) Rubber Rolls 138 x 12-1/2 dia, (3) Scroll Rolls 138 x 4 dia, (7) SS Roll 138 x 4 dia, (1) Rubber Roll 138 x 7 dia, low liquor ratio, single dip pan
Motor: Model 6M 256THTWA8038BAL, 230/460 Volt, 31.10/15.5 Amp, 1780 rpm, 20 HP
Scroll motor Type DFT80N4, 230/460 Volt, 60 Hz, 3.70/1.83 Amp, 1 HP, 1700 rpm
|
|
2426
|
1
|
Dyeing Printing & Finishing
|
|
Rail Guide / Erhardt & Leimer / Set, Type FR5501
Set of Erhardt & Leimer Rail Guides, with E&L sensors with Tandematic plate guides, controls, electric motors for power opening. Right Side: Type FR5501, No. 222331, ID 820004456 & Left side: Type FR5501, No. 222331, ID 820018736
|
|
2433
|
1
|
Lab Equipment
|
|
|
Spinlab part / Fiber basket on stand
Fiber Basket on stand for Spinlab
|
|
2438
|
1
|
Tank
|
|
Tank / Stainless Steel, 400 gallon, with mixer
Stainless Steel Tank, 400 gallon, 2-1/2 drain hole with top on legs, 48x48, with Mixer Model 3KW94G, 1.5 HP, 60 HZ, 208-230-460 Volt, 4.5 - 4.1 - 2 Amp, 1730 rpm, S/N CQM535420233
|
|
2439
|
1
|
Tank
|
|
Tank / Stainless Steel, 400 gallon, with mixer
Stainless Steel Tank, 400 gallon, 4 drain hole with top on legs, 48x48, with Mixer Model M3558T, 2 HP, 208-230-460 Volt, 6.5 - 6.2 - 3.1 Amp, 1725 rpm, 60 Hz, S/N 35A01-872
|
|
2440
|
1
|
Tank
|
|
Tank / Stainless Steel, 400 gallon, with mixer
Stainless Steel Tank, 400 gallon, 4 drain hole with to on legs, 48x48, with Mixer S/N 1-5104-12988-2-39, Type GK, 1 HP, 60Hz, 1150 rpm, 550 Volt, 1.56 Volt, 3 phase
|
|
2489
|
1
|
Knitting & Hosiery
|
|
Knitter / Reel-Tex / Sample Knitter, Model KLMIV
Reel-Tex Sample Knitter, Model KLMIV, Serial #1015070A, 4 feeders, 28 gauge, 4 diameter, 12-end package creel, Memminger Model SFT/SFE feeders, vacuum system, keypad display, 230/400/3/60
|
|
2557
|
1
|
|
|
|
Mixer / Chemineer Ing / 0.25 HP
Chemineer Ing Mixer, Model PGA-2V, 30 shaft length, 0.25 HP, 500/125 RPM, 110 volts S/N 11-8460-B. Prop Size: 4" Blades, 9" Span
|
|
2665
|
1
|
Knitting & Hosiery
|
|
Knitting / Pailung / FR2B/T, double knit
Pai Lung Knitting Machine, Model FR2B/T, double knit
Lot# No. Mach# Year Serial# Cut Size Feeds Needles
2665 89 417 --- 1999 980751 14 - 17 - 34 - 756
|
|
2720
|
3
|
|
|
Knitting / Pailung / FR2, double knit
Pai Lung Knitting Machines, Model FR2, double knit
Lot# No. Mach# Year Serial# Cut Size Feeds Needles
2720 203 418-5 1999 990977 14 - 18 - 36 - 780
2721 202 420-8 1999 990979 14 - 20 - 40 - 864
2722 201 417-6 1999 990975 14 - 17 - 34 - 744
|
|
2769
|
1
|
Lab Equipment
|
|
|
Hot Plate / Cimatec / Lab Equipment
Cimatec Barn Stead Thermolyne Hot Plate10 ½ x 10 ½, Model S131435, S/N 1314041022037, 120V/ 60Hz/3ph
|
|
2770
|
1
|
Lab Equipment
|
|
|
Hot Plate / Fisher Scientific / Lab Equipment
Fisher Scientific Hot Plate, 10 x 10, 120 Volt, 11.6 Amp, 60 Hz, S/N 202N0020, CAT 11-600-100H
|
|
2776
|
1
|
Lab Equipment
|
|
Scale / GSE Scale Systems / Model 550
GSE Scale Systems Scale, Model 550, S/N 016064, 115 Volt
|
|
2777
|
1
|
Lab Equipment
|
|
Dye machine / Fongs Hong Kong / Lab Dye
Fongs Hong Kong Type NSY Lab Dye machine, S/N 19700 M, 200/220 Volt, 50/60 Hz. With 12 cans
|
|
2779
|
36
|
Dyeing Printing & Finishing
|
|
|
J-shaped Strips / 10' lengths
J-shaped Strips, 10' lengths for tenterframes
|
|
2818
|
1
|
Lab Equipment
|
|
|
Tester / ILE Accu-Reel / Roving Tester
Accu-Reel Model ILE-AR-18, S/N 1191000
|
|
2850
|
1
|
Dyeing Printing & Finishing
|
|
|
Slitter / Dusenbury / Model 224
Dusenbury Slitter, SN 59490, Model #224, 5 pneumatic score cut slitters,
adjustable (12 hardened steel roll), 36 rotating basket
(Judelshon, Division of Dusenbery)
*Will take from 18 dia. to 24 dia. goods
Motor: DC, Model G638, Cat No. WC0502, No S/N, 1/2 HP, Armature 90V, 5A, 1750 rpm
|
|
2851
|
2
|
Dyeing Printing & Finishing
|
|
|
Slitter / Dusenbury / Model 224-30
Dusenbury Slitter, Model 224-30, 8-pneumatic score cut slitters,
adjustable (12 hardened steel roll), 36 rotating basket
(Judelshon, Division of Dusenbery)
*Will take from 24 dia. to 30 dia. goods
Lot 2851 #5251
Motor: DC, Model FD-005041-4001, Part No. M4-440000-5041, 1/2 HP, 115/230 Volt, 60 Hz, 7.0/3.5 Amp, 1730 rpm
Lot 2852 #5015
Motor: DC, CAT No. D043, Model 46606352543-0A, 3/4 HP, 90 Volt, 60 Hz, 8.1 Amp, 1725 rpm
|
|
2853
|
4
|
Dyeing Printing & Finishing
|
|
|
Slitter / Dusenbury / Model 230
Dusenbury Slitter, Model 230, 7-pneumatic score cut slitters,
adjustable (12 hardened steel roll), 36 rotating basket
(Judelshon, Division of Dusenbery)
*Will take from 24 dia. to 30 dia. Goods
Lot 2853 #59616
Motor: DC, Emerson, Model G638, Cat No. WC0502, S/N 834405, 1/2 HP, Armature 90V, 5A, 1750 rpm
Lot 2854 #59636
Motor: DC, Model FD-005041-4001, Part No. M4-440000-5041, 1/2 HP, 115/230 Volt, 60 Hz, 7.0/3.5 Amp, 1730 rpm
Lot 2856 #59621
Motor: DC, Model FD-005041-4001, Part No. M4-440000-5041, 1/2 HP, 115/230 Volt, 60 Hz, 7.0/3.5 Amp, 1730 rpm
Lot 2857 #59512
Motor: DC, Model FD-005041-4001, Part No. M4-440000-5041, 1/2 HP, 115/230 Volt, 60 Hz, 7.0/3.5 Amp, 1730 rpm
|
|
2855
|
1
|
Dyeing Printing & Finishing
|
|
|
Slitter / Dusenbury / Model 224-50
Dusenbury Slitter, Model 224-50, #57963, 7-pneumatic score cut slitters, adjustable (12 hardened steel roll), 36 rotating basket
(Judelshon, Division of Dusenbery)
*Will take from 24 dia,. to 30 dia. Goods
Motor: DC, Model FD-005041-4001, Part No. M4-440000-5041, 1/2 HP, 115/230 Volt, 60 Hz, 7.0/3.5 Amp, 1730 rpm
|
|
2901
|
6
|
Knitting & Hosiery
|
|
Knitting / Universal Flatbed / MC-613 / F/BR 5/90
(6) Universal Flatbed knitting machines, Model MC-613, F/BR 5/90"
From the early to mid-nineties, 5 gauge, have push-up needle beds for jacquard or transfer, stitch length control, stepless flexible drive, openwork reverse jacquard, central lubrication, 4 double rails with 8 yarn carriers, electronic control unit
220v, 3ph, 60 cycle
Lot# 2901 S/N 70080
Lot# 2902 S/N 71664
Lot# 2903 S/N 69936
Lot# 7248 S/N 70955
Lot# 7249 S/N 70438
Lot# 7250 S/N 71662
additional pictures available upon request
|
|
2904
|
2
|
Knitting & Hosiery
|
|
Knitting / Universal Flatbed / MC-612 / F/BR 5/84
(2) Universal Flatbed knitting machines, Model MC-612, F/BR 5/84"
From the early to mid-nineties, 5 gauge, have push-up needle beds for jacquard or transfer, stitch length control, stepless flexible drive, openwork reverse jacquard, central lubrication, 4 double rails with 8 yarn carriers, electronic control unit
220v, 3ph, 60 cycle
Lot# 2904 S/N 71214
Lot# 2905 S/N 70405
additional pictures available upon request
|
|
2907
|
1
|
Dyeing Printing & Finishing
|
|
Brush / James Hunter / Model BM-108
James Hunter 4 Roll Brush machine, Model BM-108, S/N FM-7580
Reconditioned
4 brushes 108" x 6" dia
2 steel rolls 108" x 5" dia, 1 steel roll 114" x 5" dia
|
|
2911
|
3
|
Yarn Manufacturing
|
|
Foamer / Lessco / with controls
(1) Lessco Foamer with controls - Lot 2911
Motor: Model CCF4P10T61, 10 HP, 50/60 HZ, 230/460 volt, 1750/1460 RPM, 3 PH
Pump Motor: Model B0034FLF2AYH, 3 HP, 230/460 volt, 60 Hz, 1755 RPM, 7.6/3.8 Amp,
S/N 02975591
(1) Lessco Foamer with controls - Lot 2917
Motor: Model CCF4P10T61, 10 HP, 50/60 HZ, 230/460 volt, 1750/1460 RPM, 3 PH
Pump Motor: Model P18G3832A, 3 HP, 230/460 volt, 60 Hz, 1755 RPM, 7.6/3.8 Amp,
S/N 02975591
(1) Lessco Foamer with controls - Lot 2920
Motor: Model CCF4P10T61, 10 HP, 50/60 HZ, 230/460 volt, 1750/1460 RPM, 3 PH
Pump Motor: Model B0034FLF2AYH, 3 HP, 230/460 volt, 60 Hz, 1755 RPM, 7.6/3.8 Amp,
S/N 02975583
|
|
2912
|
1
|
Yarn Manufacturing
|
|
|
Air Compressor / Gardner Denver / 100 HP
Gardner Denver Air Compressor, Rotary Screw, Model EBPQMB, ID No. BACAACO, air-cooled
Motor: 100 hp, 3 ph, 60 hz, 1770 rpm, 238/119 amp
Frame: 404TSC, S/N U1940325.001
|
|
2913
|
1
|
Dyeing Printing & Finishing
|
|
Calender / Ramish Kleinweifers / 80" Wide / 50 Ton
Ramish Kleinweifers two roll calender, 80" wide, 50 ton
Serial number 111212.00, Year 1980
Top roll is 16" dia x 80" face steel, driven roll, gas heated
Bottom roll is 18" dia x 80" face with nylon sleeve
Three roll tension with bow roll
E-stop with pull cord
No control panel
Reliance 25 hp DC motor, Model 2MAF78174, 460 volt, 60 hz, 3ph, 23.5 amp, 1750 rpm
Hydraulic motor Model P1863883C, 230/460 volt, 60 hz, 3 ph, 13.0/6.5 amp, 1750 rpm, 5 hp
A frame surface winder, 80" face, DC driven, One A frame drive, One take-up bar
|
|
2914
|
1
|
Dyeing Printing & Finishing
|
|
|
Inspection Machine / Umac / 80" wide
Umac inspection machine, 80" wide, consisting of:
A) A-frame let-off, 80" wide, pneumatic, motor driven (5 HP, 230/460 volt, 3 ph, 60 hz), chain drive
B) Compensator, 80" wide, with 3 top rolls and 2 bottom rolls
C) Lighted inspection board, with overlight; light box is 82" wide
D) Operator platform
E) 2 roll surface winder, 80" x 12" dia. rolls with 1 bow roll 79" x 4 1/2" dia., with edge guide
F) variable speed drive (5 HP, 230/460 volt, 3 ph, 60 hz)
|
|
2915
|
1
|
Embroidery & Sewing
|
|
|
Sewing Machine / Merrow / With Stand / Chrome Head
Merrow Sewing machine Style 70-D3B, S/N 220894, with stand, chrome head, 115 volt
|
|
2916
|
1
|
Embroidery & Sewing
|
|
|
Sewing machine / Merrow / with stand
Merrow Sewing machine Style 70-D3B-2, S/N 240561, with stand. 115 volt
|
|
2918
|
6
|
Dyeing Printing & Finishing
|
|
Tenter Part / M&W Part #416 / Gear
(6) Marshall & Williams Part #416, 6 spline, 41 tooth spline pinion gear for #700 drive gear box
|
|
2919
|
1
|
Dyeing Printing & Finishing
|
|
|
Gear / Tenter Frame / for T5 & T6 gearbox
Tenter Frame gear, 2C-44A, 45T for T5 & T6 gearbox
|
|
2921
|
1
|
Embroidery & Sewing
|
|
|
Clicker Press / Mfr. Supplies / Atom / SE200
(1) Manufacturers Supplies Co. Atom Clicker Press, Model SE200, Year 2007, S/N 10039262-57, Ref. No. B1AE6200
Motor: 220/230 volt, 60 hz, 0.9 kw, power T/KN 20
Machine Wt: 630 kg
|
|
2924
|
1
|
Embroidery & Sewing
|
|
Sewing / Yamato / On Table
(1) Yamato sewing machine on table
AZ8020G-Y5DF
|
|
2929
|
1
|
Material Handling
|
|
Strapping Dispenser
Mobile strapping dispenser (single) for plastic strapping
|
|
2932
|
1
|
Lab Equipment
|
|
Infrared Moisture Analyzer / Sartorius
(1) Sartorius Infrared Moisture Analyzer, Model MA150C-000115V1
Max. weighing capacity 150 g, 115 volt, 50/60 hz
|
|
2933
|
1
|
Lab Equipment
|
|
L-C Oven
(1) L-C Oven, Model 3510, S/N 0581-167
500 watts, 120 volt, 50/60 hz, 4.2 amp
|
|
2935
|
1
|
Lab Equipment
|
|
Colorscan / Hunter Lab / Ultrascan
(1) Hunter Lab Colorscan Ultrascan, Model DP-900, D25M optical sensor, S/N 91035
|
|
2937
|
1
|
Yarn Manufacturing
|
|
Metal Detector / Argus / CEIA TT
(1) Argus Metal Detector, CEIA TT, S/N 9790041
115/230 volt vac, 50/60 hz, 60 amax
|
|
2938
|
1
|
Material Handling
|
|
Drum Grab / Wesco Poly Jaws
(1) Wesco Poly Jaws Drum Grab, fork mounted
Max. 1000 lbs/ 453 kgs
|
|
2939
|
1
|
Embroidery & Sewing
|
|
|
Clicker / USM Hytronic Cutting / Model B
(1) USM Hytronic cutting machine (clicker press), Model B, 10 ton, S/N 1063
Motor driven, hydraulically powered. May be either electrically or manually controlled by an alternate stroke control mechanism.
Cuts sheet materials - leather, fabric, paper, plastic, various kinds of conductive and nonconductive flat material.
Machine data: length 35 1/4" base, 57 1/4" beam swing, depth 40", height 58 to 62 1/2", gross wt. 1968 lbs.
Motor: 1 1/2 hp, 1200 rpm
Rotation: counterclockwise, maxiumum stroke 2 1/4"
|
|
2941
|
1
|
Dyeing Printing & Finishing
|
|
Homogenizer / 7.5 hp, 31" shaft
Homogenizer, Shaft Size 31 long x 1 Ό dia.
7.5 hp, 60 hz, 3 ph
Frame: 213 hp, 230/460 volt, 3500 rpm, 20.4/10.2 amp, type LV-9
ID 64-09294-417
|
|
2942
|
1
|
Dyeing Printing & Finishing
|
|
Homogenizer / 25 hp, 58" shaft
Homogenizer, Shaft Size 58 long x 1 1/2 dia., Model N256T34FC4
25 hp, 208/230/460 volt, 3450 rpm, 58/56/28 amp
|
|
2943
|
1
|
Dyeing Printing & Finishing
|
|
Centering Device / Corino / 80 wide
Corino Centering Device consisting of:
(1) Alum. Roll 91 wide x 4 diameter
(1) Covered Roll 91 wide x 4 diameter
(2) Scroll Rolls 88 wide x 4 diameter
(3) SS Rolls 80" wide x 4" diameter
Driven scroll motor tag: S/N F498, cat. VM3556T, spec 35A03-1272, 208/230/460 volt, 60 hz, 3 ph, 3.6/3.4/1.7 amp
|
|
2945
|
1
|
Dyeing Printing & Finishing
|
|
Boiler / Columbia Boiler Co. / CT
Columbia Boiler Co. Boiler, Type CT, S/N 148403, Warrick controls
Rating: HP20, Max. W.P.: 150, WHS: 47.6, HD.TH: ½, SH.TH: 3/8
Valve Cap. 690 lbs/hr, STM Cap. 690 lbs/hr
Min. Clearances from walls and ceiling: rear and sides 18, front - 48
Vent connector 18 above 18
115 volt, 60 cycle, 12 amps or less
Fire rate: natural gas 840,000 btu/hr
Gas piping is 1, has 6 vent holes
|
|
2946
|
1
|
Dyeing Printing & Finishing
|
|
|
Dye Pad / Eduard Kusters / 134" W
(1) Eduard Kusters Dye Pad Type 222.17-3200, S/N 10611814, year 1984
Single dip pan has 1 rubber roll 132 w x 6 ½ dia.
2 rubber rolls 134" w x 11 dia, one roll is driven
No motor
With 5 extra used rolls, 1 used roll has new cover
|
|
2955
|
1
|
Dyeing Printing & Finishing
|
|
Vacuum Slot / EVAC / Adjustable, 84 wide
EVAC Vacuum Slot 84 wide, adjustable
|
|
2962
|
2
|
Tank
|
|
Tank / Stainless Steel, with top, 500 gallons
Stainless Steel Tank on legs,500 gallons, with top, 2 drain hole, 47 high x 56 diameter
(1) Lot# 2962
(1) Lot# 2963
|
|
2964
|
1
|
Tank
|
|
Tank / Stainless Steel, without top, 500 gallons
Stainless Steel Tank on legs, 500 gallons, without top, 2 drain hole, 47 high x 56 diameter
|
|
2965
|
1
|
Tank
|
|
Tank / Stainless Steel, without top, 600 gallons
Stainless Steel Tank on legs, 600 gallons, without top, 2 drain hole, 52 high x 58 diameter
|
|
2966
|
2
|
Tank
|
|
Tank / Stainless Steel, with top, 750 gallons
Stainless Steel Tank on legs, 750 gallons, with top, 2 drain hole, tapered bottom, 72 high x 52 diameter
(1) Lot# 2966
(1) Lot# 2967
|
|
2970
|
1
|
Tank
|
|
Tank / Stainless Steel, without top, 550 gallons
Stainless Steel Tank on legs, 550 gallons, without top, with wash ring, 2 drain hole, 72 high x 47 diameter
Lot# 2970
|
|
2971
|
1
|
Tank
|
|
Tank / Stainless Steel, without top, 550 gallons
Stainless Steel Tank on legs, 550 gallons, without top, 2 drain hole, 47 high x 57 diameter
|
|
2973
|
2
|
Dyeing Printing & Finishing
|
|
Wash Box / Morrison / SS, double lace, 80" wide
Morrison Stainless Steel, Double Lace Wash Boxes 80 wide, Model DLE 5 (For medium to heavy weight fabrics, external sealed immersion roll bearings)
SS Rolls: (21) 80 wide x 5 diameter & (2) 80 wide x 6 diameter
Overall dimension: 67 high x 90 wide x 70 F.B.
|
|
Record 1-100 of 336
|
first |
previous |
next |
last
|
|
